首页 > ADI 模拟器件公司 > 电源和散热管理 > 开关电容变换器

ADM8839ACP-REEL: Charge Pump Regulator for Color TFT Panel

The ADM8839 is a charge pump regulator, used for colour TFT (Thin Film Transistor) LCD’s (Liquid Crystal Displays). The device can be used to generate 3 output voltages (+5 V ±2%, +15 V, -15 V) from a single 2.7V - 4.2V (li-ion) input supply, using charge pump technology. These voltages are then used to provide supplies for the LCD controller (5 V ±2%), and the gate drives for the transistors in the panel (+15 V and -15 V). Only a few external capacitors are needed for the charge pumps. An efficient low dropout voltage regulator also ensures that the power efficiency is high and provides a low ripple 5 V output. This LDO can be shutdown and an external LDO used to regulate the 5 V doubler output and to drive the input to the charge pump section which generates the +15 V and -15 V outputs if so required by the user.

The ADM8839 has a power save shutdown feature. The 5 V output consumes the most power, so Power Efficiency is also maximised on this output with an oscillator enabling scheme (Green IdleTM). This effectively senses the load current that is flowing and turns on the charge pump only when charge needs to be delivered to the 5 V pump doubler output.

The ADM8839 is fabricated using CMOS technology for minimal power consumption. The part is packaged in a 20- lead LFCSP (Lead Frame Chip Scale Package) with a tiny 4mm x 4mm footprint.

ADM8839ACP-REEL 特点
ADM8839ACP-REEL 功能框图

ADM8839 芯片订购指南
产品型号 产品状态 封装 引脚 温度范围
ADM8839-EVALZ 量产 评估板 20 待定
ADM8839ACP 量产 20 ld LFCSP (4x4mm) 20 工业
ADM8839ACP-REEL 量产 20 ld LFCSP (4x4mm) 20 工业
ADM8839ACP-REEL7 量产 20 ld LFCSP (4x4mm) 20 工业
ADM8839ACPZ 量产 20 ld LFCSP (4x4mm) 20 工业
ADM8839ACPZ-REEL 量产 20 ld LFCSP (4x4mm) 20 工业
ADM8839ACPZ-REEL7 量产 20 ld LFCSP (4x4mm) 20 工业
ADM8839ACP-REEL 应用技术支持与电子电路设计开发资源下载
  1. ADM8839 数据手册DataSheet 下载 . PDF
  2. ADI 模拟器件公司比较器产品选型指南 . PDF
  3. Analog Devices, Inc. 美国模拟器件公司产品订购手册 .PDF